3 Easy Ways to Fix Canon Printer Error 5b00

 

Follow the steps below to fix the issue with Canon's ink pads and counters

  • The 5b00 error usually denotes a situation when a user cannot print due to the improper usage of the ink cartridge.
  • If you encounter the Canon printer error 5b00, you should reset the waste ink counter, as shown below.
  • You can also manually clean the waste ink pad by following the steps from our guide.
Easy guide to fix Canon printer error 5b00

To fix various PC problems, we recommend Restoro PC Repair Tool:
This software will repair common computer errors, protect you from file loss, malware, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove viruses now in 3 easy steps:

  1. Download Restoro PC Repair Tool that comes with Patented Technologies (patent available here).
  2. Click Start Scan to find Windows issues that could be causing PC problems.
  3. Click Repair All to fix issues affecting your computer's security and performance
  • Restoro has been downloaded by 538,156 readers this month.

The error code 5b00 is a very common problem that appears on  printers quite frequently. While you turn it on and try to print a document, you’ll first notice that the printer boots normally.

However,  or scanning a document is no longer possible. The lamp starts flashing green and orange a few times in a row, but be sure that this article will help you out.

We have provided some of the best possible solutions for the problem in the below section. Just make sure to follow them carefully to avoid causing any other issues.

Why am I getting Canon 5b00 error?

by Decent - Updated on 

It’s possible that the error occurred because your printer had an ink leak, because the ink absorber was already at capacity, or because the waste ink counter had reached its limit.

Users reported a plethora of similar errors that can be fixed by following the solutions below. Some of them are the following:

  • G2000 Canon 5b00 error – After pressing and holding the Stop button for a few seconds, you should let go of it when the Alarm bulb flashes seven times.
  • E400 Canon 5b00 error – Error 5B00 suggests that the waste ink container is already full. This criterion will be satisfied by each and every inkjet printer.
  • Canon 5b00 error G4000 – Please press the cancel button a total of 5 times.
  • Canon 5b00 error G2010 – You may select Black by pressing the button, or Color by pressing the button. The count of leftover ink will be brought back to zero.
  • G4010 Canon 5b00 error – Resetting the count of the amount of remaining ink when there has been no error about the amount of remaining ink.
  • G3010 Canon 5b00 error – The waste ink counter has overflowed, which is indicated by the Canon G3010 error code 5B00.
  • Canon 5b00 error G1000 – You need to reset the Waste Ink Counter on your Canon G1000.
  • Canon 5b00 error G3000 – Simply hit the button labeled cancel, 6 times.
  • 5B00 error Canon E470 – This indicates that the waste ink counter has reached its maximum capacity.
  • Error 5B00 Canon IP2770 – The waste ink counter has been reset, which is indicated by the Canon Pixma iP2770 error code 5B00.

Without further ado, let’s jump into the list of solutions to the Canon 5b00 error. Follow along!

How do I fix Canon 5b00 error?

1. Reset the waste ink counter

  1. Firstly, unplug the power and the USB cables from the printer.
  2. Open the cartridge door and press down the Power button.
  3. Continue to hold the Power button while plugging the power cord into the wall socket.
  4. Keep holding the Power button until the printer starts resetting itself. Once all the lights are on, you may release it.
  5. Wait for the green power light to turn off. Then, press and release the Power button quickly twice.
  6. The green light should blink for a few more seconds and finally stabilize.
  7. Feel free to close the cartridge door and try printing again.

The 5b00 error is often caused by ink spills on your printer in Windows 10. The same applies to a full ink absorber or full waste ink counter, so reset the ink absorber.

You may actually apply this quick fix to clear out many error codes that may appear when turning the printer on.

Also, if you can’t remove the printer in Windows 10, you can take a closer look at our comprehensive guide and fix it with ease.

2. Manually clean the waste ink pad

  1. Open the ink cartridge compartment. Depending on the Canon printer model you use, this compartment could be in the front or the back of the machine.
  2. Wait for the ink cartridges to move all the way over. Up next, disconnect the printer’s power cord.
  3. Behind the cartridge is a row of white rollers. Look for a small square near the roller that looks like a foam pad.
  4. You need to detach the waste ink absorber by pulling it gently on its rubber frame.
  5. Clean it by using a paper towel. Try to collect all ink waste on paper towel pieces.
  6. Put all the cartridges back in their place. Reinstall the frame in the printer.
  7. You may now press and hold the Power button and reconnect the power cord.
  8. When the printer comes on, release the button. Wait five seconds and push the Power button again. This resets the printer’s internal memory and overrides the 5b00 error code.
Location: Nigeria

Comments

Post a Comment